- Hyponatremia can occur when sodium concentration is high and the conductivity monitors of the dialysis machine are not functioning or the alarms are not set properly
- Dialysate conductivity can be incorrectly sensed as low by the coated conductivity cells (that gets coated by granules from less soluble batch of sodium bicarbonate powder)1
- At the start of dialysis if an error is made when connecting concentrate containers
- During dialysis if containers run dry and conductivity monitor fail
- Dialysis can be resumed with dialysate sodium 2 mEq/L lower than plasma sodium concentration while infusing isotonic saline. Use of dialysate sodium 3-5 mEq/L lower than plasma sodium might increase the risk of disequilibrium syndrome.
- Frequent check of conductivity monitors which can get coated with bicarbonate granules2 and can cause falsely low readings
- Williams DJ, Jugurnauth J, Harding K, Woolfson RG, Mansell MA. Acute hypernatraemia during bicarbonate-buffered haemodialysis. Nephrol Dial Transplant 9:1170-1173, 1994
- Sterns RH, Silver SM. Hemodialysis in hyponatremia: Is there a risk? Semin Dial 3:3-4, 1990